We Fabricate What You Need, When You Need It!
• Serving Since 1988 •
Located just outside of Charlotte, North Carolina,
American Metal Fabricators has a proven history fabricating with a variety of materials including steel, stainless steel, and aluminum.
We provide custom fabricated projects including, but not limited to, Air Washers, Air Handling Units, Foam Panels,
Energy Recovery Systems, Dryers/Ovens/Furnaces, Plenums & Duct Systems, Dust Filtration Equipment, Gas Turbine Filtration,
Mining Equipment, Humidification Systems, Oil & Water Mist Eliminator Systems, Acoustic Enclosures, Scrubbers & Spray Systems, Evaporative Cooling Systems, and so much more!
We are a custom metal fabrication shop,
operating in a 200,000 square feet facility
in Gastonia, NC.
Our business is located in an industrial area
that offers a large, skilled labor force,
allowing rapid expansion.
We are ideally suited to handle large jobs, but
also provide special handling for smaller jobs.
We pride ourselves with our ability to meet delivery requests that are complex with short lead times.
200,000 sq. ft Mfg Space
30,000 sq ft Sandblast Building
High Bay w/Overhead Cranes & Drive-thru Truck Access
Welders, Fabricators, Pipefitters, Electricians, Machinists,
Painters, & Mechanics
Designers, Drafters, Schedulers, & Expediters
Sales, Marketing & Distribution
Power Generation, Utilities,
Paper, Pulp, Fibers, Textiles, Wood, & Furniture
Food & Beverage
Chemicals, Plastics & Paint
Shears, Brakes, Punch & Roll
Plasma & Laser Cutters
Sandblast & Paint
MIG, TIG, Stick, & Fluxcore Welding
Foam Panel Equipment
Cranes, Hoist, & Forklifts
With experienced welders that can
MIG, TIG, Stick and Fluxcore weld,
our workforce is capable of welding
all metal types including
stainless, aluminum, and carbon steel.
SHEARING & FORMING
Fifteen (15) press brakes
can handle up to 14 feet of material,
with a force of over 400 tons.
Five (5) shears can
cut 1/2 inch thick material with
a capacity up to 12 feet in length.
We have a 500 feet rail paint line system with a downdraft paint booth. We have the ability to chemically clean before beginning the painting process.
We have 4 plasma cutting tables that can hold up to 10 feet wide material with a capacity
of 40 feet in length.
We have a dedicated building to house our sand blasting department. We can SP6 to SP10 blast, based on the requested profile. Our equipment has a media recovery system. We do not use silica sand.
We have angle ring, pipe and channel rolling capability.
With a 200,000 square feet facility, we have ample room to assemble large units, as well as stage purchased equipment to go with our finished product.
INSULATED FOAM PANELS
Our panels are constructed from
rigid metal or other skin such as
stainless, embossed aluminum, galvanized, OSB, or other pre-finished material.
Our standard panel thickness is 2 inches, but we offer custom thicknesses between 1 inch to 6 inches, manufacturing panels up to 4 feet wide and over 14 feet in length. Panels are injected to ensure a void-free core for strength and performance. Weighing in at 1.5 lbs/sq.ft., manpower and equipment requirements are minimized onsite. Designed with a 2-inch thick polyurethane core, our panels have the same thermal characteristics as 4 inches of fiberglass. Our panels have been tested in accordance with ASTM E84 and meet SNAP 2021 requirements.
Our panel systems are joined together by no-thru metal extruded aluminum members, ensuring a thermal break between the inside and outside skins, as well as reinforcing the enclosure for high-pressure applications. They can also be joined by tongue & groove butt joints, flashing strips and trim angles that allow similar no-thru metal construction for low-pressure applications. All joints are sealed to be water and airtight, with sealant or industrial RTV silicone and are mechanically fastened per manufacturing instructions.
We manufacture foam panel doors, duct doors, marine access doors and standard access doors for use in multiple applications.
GET IN TOUCH
2608 Lowell Rd, Gastonia, NC 28054, USA